Replace Key Fob Batteries

How to Replace the Battery in a 2002 Chrysler Sebring Key Fob

How to Replace the Battery in a 2002 Chrysler Sebring Key Fob

If your car key fob isn't open doors correct, the cell battery probably needs to be changed. It's not difficult to replace the battery in your remote key fob DIY. Everything you need is explained in this post.

What type battery does 2002 Chrysler Sebring keyless entry remote take

Prior to disassembly key fob make sure that you have all recommended tools and materials: flat head screwdriver and CR2016 batteries.
  • flat head screwdriver
  • 2xCR2016 batteries

Simple steps to replace the battery in your car's key fob

Inside of your key fob installed small button cell battery. Carefully try to disassemble your fob with hands or flat head screwdriver. Change 2 CR2016 batteries with flat head screwdriver.

Now it's time to install new batteries inside fob’s body. Battery must be installed with the same position as was an old. Your keyless entry remote will not work if you by mistake put battery wrong way.

Before assembling fob’s case, check that all functions works by testing buttons on remote key fob.

The last thing to do is put your cover back on fob. Carefully try to put the two halves in place by hands from top to bottom. If your remote key fob body tightly closed, we done. If not, repeat the last step.

How to change the battery video guide

How To Replace Chrysler Sebring Key Fob Battery 2001 2002 2003 2004 2005 2006

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Chrysler Sebring require 2xCR2016 batteries. Most CR2016 batteries are under $6 depending on the brand, type and size packaging you buy. You can take old battery to the store, with you to find a proper replacement.

Often, after remote key fob battery replace, reprogramming not required. Don't be scare of this procedure, because often it's described in user's manual.

Yes, you can change battery in your 2002 Chrysler Sebring key fob yourself. Most hard part is to disassembly keyless entry fob's case. It's pretty simple with our instruction.

Dealer service pricing for change the battery in fob is $50-600 depending on the car.

Keyless entry remote batteries in modern cars should be changed every three years, but this will vary based on usage and battery quality. If your key fob shortened signal strength, you should replace batteries before it stop open doors and make trouble for you.

These signs will warning you that it's perhaps time to change battery in your 2002 Chrysler Sebring: low key battery indicator on dashboard, multiple clicks to unlock or lock doors required, you didn't change battery more than 4 years and signal strength reduced.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Chrysler Models:

Fob Compatibility:

  1. FCC ID: GQ43VT17T
  2. Models: 2001-2006 Chrysler Sebring