2002 Isuzu Amigo Key Fob Battery Replacement Instructions
Keyless entry remote grant access to your Isuzu. Once the key fob battery is dead you will not to be able unlock car remotely. In this post, you’ll benefit from knowing how to disassembly Isuzu keyless entry remote and replace a weak or dead battery yourself. If you choose to do it at home near Amigo, use this guide, but first make sure you have everything you need before you start.
What size battery does 2002 Isuzu Amigo key fob required
Before beginning disassembly remote key fob check all that you need: flat head screwdriver, phillips head screwdriver and CR2016 batteries.- 2xCR2016 batteries
- flat head screwdriver
- phillips head screwdriver
Step by step guide
A small coin cell battery installed in the your remote key fob. Unscrew the back of the remote key fob. Flip the remote key fob over and find for at least one screw holding in the plastic.
Carefully try to open your key with hands or flat head screwdriver. Change 2 CR2016 batteries with flat head screwdriver.
Now it's time to install new batteries in fob’s body. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that all working fine by testing buttons on key fob.
At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and assemble it in place by hands from top to bottom. If your remote key fob body tightly closed, we done. If not, repeat the last step. Screw fastener in the back of the remote key fob.
Key Fob Battery Replacement 2002 Isuzu Amigo Video
How To Replace Isuzu Amigo Key Fob Battery 1998 1999 2000 2001 2002
Still not working? Buy new one