2002 Jaguar XKR Key Fob Battery Replacement Guide
Key fob allow access to your Jaguar. When the remote key fob battery is dead you’ll lose your fob’s ability to use remote opening function. Yes, it is possible to replace the battery in your remote key fob, and it’s easier than you think. All tools, that you need is explained below.
What type battery does 2002 Jaguar XKR keyless entry remote takeBefore going to disassembly remote key fob check all that you need: flat head screwdriver and 1 CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
Inside of your remote key fob installed button battery. Open key first, and then try to pry apart the keyless entry remote.
Gently try to disassemble your fob with pry tools. Remove one CR2032 battery with flat head screwdriver.
Get new battery and install it inside fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, verify that all functions works by testing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your case two halves together and put it together by hands from top to bottom. Check your key body for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2002 Jaguar XKR Video
How To Replace Jaguar XKR Key Fob Battery 2001 2002 2003
Still not working? Buy new one