How to Replace the Battery in a 2002 Jeep Grand Cherokee Key Fob
If your auto key fob isn't unlock doors correct, the battery most likely must to be changed. Yes, it is possible to change the battery in your keyless entry remote with our ultimate guide. Everything you need is explained in this article.
What type battery does 2002 Jeep Grand Cherokee remote key fob required
Before beginning disassembly key fob check all that you need: flat head screwdriver and 2 CR2016 batteries.- 2xCR2016 batteries
- flat head screwdriver
Simple steps to replace the battery in your Grand Cherokee's remote key fob
Inside of your remote key fob installed tiny coin cell battery. Gently try to disassemble your keyless entry remote with pry tools. Replace 2xCR2016 batteries with flat head screwdriver.
Change old batteries with fresh one CR2016. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
When the new batteries installed, verify remote key fob functionality by pressing buttons. If all functions works, assemble your keyless entry fob's case in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your shell two halves together and assemble it in place by hands from top to bottom. If your fob body firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2002 Jeep Grand Cherokee Video
How To Replace a Jeep Grand Cherokee Key Fob Battery 1999 - 2004 FCCID: GQ43VT9T
Still not working? Buy new one