2003 Chevrolet Venture Key Fob Battery Replacement Instructions
If your Chevrolet remote key fob is not open doors properly, the cell battery surely must to be replaced. It's not difficult to change the battery in your remote key fob, and it’s easier than you think. All tools, that you need is outlined below.
What type battery does 2003 Chevrolet Venture key fob takeBefore beginning disassembly keyless entry remote check all that you need: flat head screwdriver and one CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Venture's keyless entry remote
Inside of your remote key fob installed small coin battery. Delicately try to open your key fob with hands or flat head screwdriver. Remove CR2032 battery with flat head screwdriver.
Get new battery and install it inside keyless entry fob's body. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that all is functioning by testing buttons on keyless entry remote.
At this point squeeze fob’s back cover together. Line your body two halves together and put it in place by hands from top to bottom. If your key shell tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2003 Chevrolet Venture Video
How To Replace Chevrolet Venture Key Fob Battery 2001 2002 2003 2004 2005