How to Replace the Battery in a 2003 Dodge Ram Van Key Fob
If your Dodge key is no longer open doors correct, the cell battery most likely needs to be replaced. In this article, you will benefit from knowing how to open Dodge keyless entry remote and replace a discharged battery yourself. If you gonna solve to do it at home near Ram Van, use this instruction, but don't forget to check tools and materials required before you start.
What type battery does 2003 Dodge Ram Van key fob take
Prior to open key fob check all that you need: flat head screwdriver and 2xCR2016 batteries.- 2xCR2016 batteries
- flat head screwdriver
Step by step guide
Inside of your remote key fob installed small button cell battery. Accurately try to pry apart your key fob with pry tools. Remove two CR2016 batteries with flat head screwdriver.
Change old batteries with fresh one CR2016. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new batteries installed, check key fob by pressing buttons. If all functions works, assemble your keyless entry fob's case in reverse order.
The last thing to do is put your cover back on fob. Accurately try to assemble the pieces in place by hands from top to bottom. Inspect your key shell for gaps. If it is not firmly closed try to repeat last step.
Key Fob Battery Replacement 2003 Dodge Ram Van Video
DIY: Dodge Keyless Remote Battery Replacement & Disassembly
Still not working? Buy new one