2003 Ford Windstar Key Fob Battery Replacement Guide
If your car key is no longer working correct, the cell battery most likely must to be replaced. Below, we demonstrate how to open your keyless entry remote and change a dead battery DIY. If you gonna solve to do it at home near Windstar, use this instruction, but don't forget to check everything you need.
What type battery does 2003 Ford Windstar remote key fob required
Replacing battery in key fob require 1xCR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your Windstar's keyless entry remote
Inside of your keyless entry remote installed small button battery. Delicately try to pry apart your remote key fob with flat head screwdriver. Remove 1xCR2032 battery with flat head screwdriver.
Now it's time to install new battery in fob’s shell. Battery must be installed with the same polarity as was a previous. Your remote key fob will not work if you by mistake put battery wrong way.
Before assembling fob’s case, verify that all working good by testing buttons on remote key fob.
The last thing to do is put your cover back on fob. Delicately try to put the pieces in place by hands from top to bottom. If your key shell firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2003 Ford Windstar Video
How To Replace Ford Windstar Key Fob Battery 2001 2002 2003 2004
Still not working? Buy new one