How to Replace the Battery in a 2004 Audi Allroad Quattro Key Fob
If your Audi key fob is not open doors well, the battery probably must to be replaced. Yes, it is possible to change the battery in your keyless entry remote DIY. All tools, that you need is explained in this article.
What type battery key fob requireDon't forget before open keyless entry remote check all that you need: flat head screwdriver and one CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Allroad Quattro's remote key fob
Inside of your key fob installed tiny button cell battery. Open the key if it is in the remote key fob. Your keyless entry remote key can be unmounted with slide.
Gently try to disassemble your keyless entry remote with pry tools. Change 1 CR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Battery must be installed with the same position as was an old. Your remote key fob will not work if you mistakenly place battery wrong way.
When the new battery installed, check keyless entry remote by pressing buttons. If everything working properly, assemble your fob’s case in reverse order.
At this point squeeze fob’s back cover together. Line your case pieces together and assemble it in place by hands from top to bottom. If your keyless entry remote body firmly closed, we done. If not, repeat the last step.
How to change the battery video guide
2004 Audi A4 key fob battery replacement