2004 Chevrolet Malibu Key Fob Battery Replacement Instructions
Key fob grant access to your Chevrolet. If the key battery is weak or dead you’ll not to be able unlock trunk or doors from distance. Yes, it is possible to change the battery in your keyless entry remote DIY. All tools, that you need is explained in this article.
What type battery does 2004 Chevrolet Malibu keyless entry remote required
Don't forget before open key fob check all that you need: one CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
A small button cell battery installed in the your key fob. Delicately try to open your keyless entry remote with flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.
Get new battery and install it inside keyless entry fob's shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
When the new battery installed, check key fob functionality by pressing buttons. If all functions works, assemble your fob’s body in reverse order.
At this point squeeze fob’s back cover together. Line your shell two halves together and put it in place by hands from top to bottom. If your key body tightly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
How to REPLACE Remote Key Fob Battery (Chevy Malibu & GM)
Still not working? Buy new one