2004 Chrysler Pacifica Key Fob Battery Replacement Guide

2004 Chrysler Pacifica Key Fob Battery Replacement Guide

If your car keyless entry remote isn't unlock doors correct, the cell battery more likely must to be replaced. Below, we explained how to disassembly your key fob and change your Chrysler key battery step by step.

What size battery does 2004 Chrysler Pacifica keyless entry remote required

Before starting open keyless entry remote be sure that you have all recommended tools and materials: flat head screwdriver and CR2032 battery.
  • 1xCR2032 battery
  • flat head screwdriver

Simple steps to change the battery in your car's keyless entry remote

A tiny coin battery installed in the your key fob. Accurately try to pry apart your keyless entry remote with flat head screwdriver. Change 1 CR2032 battery with flat head screwdriver.

Now it's time to install new battery inside fob’s shell. Be sure to connect the battery the right way around in a circuit. Your key will not work if you put battery wrong way.

When the new battery installed, verify key fob functionality by pressing buttons. If everything working good, assemble your keyless entry fob's body in reverse order.

At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and put it in place by hands from top to bottom. If your keyless entry remote shell tightly closed, we done. If not, repeat the last step.

How to replace the battery video guide

Chrysler Pacifica Key Fob Battery Replacement (2004 - 2008)

Still not working? Buy new one


Keyless entry remote of Chrysler Pacifica require 1xCR2032 batteries. Most CR2032 batteries are under $6 depending on the brand, type and size packaging you buy. Take your old battery to the store, with you to find a proper replacement.

Keyless entry remote in most of cases reprogramming not required after battery replace. If your keyless entry remote not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Yes, you can replace battery in your 2004 Chrysler Pacifica key yourself. Most difficult part is to open fob’s case. It's pretty simple with our guide.

The cost to change the battery in keyless entry remote is from $30 to as high as $500 depending on the make and the service pricing.

You should replace batteries inside keyless entry remote of Chrysler Pacifica at least once in three years. The term of battery vary on their amount of use, operating conditions and quality.

These signs will warning you that it's possible time to replace battery in your 2004 Chrysler Pacifica: signal strength reduced, you didn't change battery more than 4 years, low key battery indicator on dashboard and key fob buttons not working.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: OHT692714AA
  2. Models: 2004-2008 Chrysler Pacifica