Replace Key Fob Batteries

How to Replace the Battery in a 2004 Chrysler Sebring Key Fob

How to Replace the Battery in a 2004 Chrysler Sebring Key Fob

If your Sebring key is no longer open doors correct, the battery likely must to be changed. In this post, you’ll benefit from knowing how to open Chrysler keyless entry remote and replace a weak or dead battery yourself. If you choose to do it at home near Sebring, use this instruction, but first make sure you have everything you need before you start.

What type battery remote key fob require

Replacing batteries in remote key fob require CR2016 batteries and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.
  • flat head screwdriver
  • 2xCR2016 batteries

Step by step instruction

A button battery installed in the your key fob. Gently try to disassemble your remote key fob with flat head screwdriver. Replace CR2016 batteries with flat head screwdriver.

Get new batteries and install it inside fob’s shell. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you put battery wrong way.

Before assembling fob’s case, verify that all working properly by testing buttons on circuit board.

At this point squeeze fob’s back cover together. Line your body pieces together and put it in place by hands from top to bottom. If your keyless entry remote shell firmly closed, we done. If not, repeat the last step.

How to replace the battery video guide

How To Replace Chrysler Sebring Key Fob Battery 2001 2002 2003 2004 2005 2006

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Chrysler Sebring require 2xCR2016 batteries. Most CR2016 batteries are under $6 build upon the brand, size packaging and type you buy. You can take old battery to the store, to find a proper replacement.

Key fob in most of cases reprogramming not needed after battery replace. If your remote key fob not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Yes, you can replace battery in your 2004 Chrysler Sebring keyless entry remote yourself. Most hard part is to open fob’s case. It's pretty easy with our instruction.

Car service price for replace the battery in key is from 50 to 600 dollars depending on the car.

Remote key fob batteries in Chrysler Sebring should be replaced once in 3-4 years, but this will differ based on frequency of use and battery quality. If your key fob reduced signal strength, you should replace batteries before it stop open doors and make trouble for you.

If your car fob's battery more than 4 years old, need multiple clicks to unlock or lock doors, signal strength reduced or key fob buttons not working, it's probably battery change inside keyless entry remote required. Installed battery is dead with a high probability, but if it's not help to fix issues, key change or repair required.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Chrysler Models:

Fob Compatibility:

  1. FCC ID: GQ43VT17T
  2. Models: 2001-2006 Chrysler Sebring