How to Open Your 2004 Chrysler Voyager Key Fob and Change Battery
Remote key fob allow easy access to your Voyager. When the remote key fob battery is dead you will not to be able open trunk or doors remotely. It's not difficult to replace the battery in your key fob with our step by step instruction. Everything you need is described in this article.
What type battery does 2004 Chrysler Voyager key fob required
Before starting open keyless entry remote check all that you need: 2xCR2016 batteries and flat head screwdriver.- 2xCR2016 batteries
- flat head screwdriver
Step by step instruction
A button battery installed inside the your keyless entry remote. Carefully try to pry apart your key fob with pry tools. Replace CR2016 batteries with flat head screwdriver.
Get new batteries and install it inside keyless entry fob's body. Battery must be installed with the same polarity as was an old. Your key will not work if you by mistake put battery wrong way.
After the new batteries installed, verify keyless entry remote by pressing buttons. If everything working good, assemble your keyless entry fob's case in reverse order.
At this point squeeze fob’s back cover together. Line your shell two halves together and put it in place by hands from top to bottom. Inspect your key case for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2004 Chrysler Voyager Video
Chrysler Voyager Key Fob Battery Replacement (2004 - 2007)
Still not working? Buy new one