How to Open Your 2004 Lincoln Navigator Key Fob & Change Battery

If your car key is not open doors properly, the battery surely must to be replaced. It's not complicated to replace the battery in your key fob, and it’s easier than you think. All you need is explained in this post.
What type battery does 2004 Lincoln Navigator keyless entry remote required
Changing battery in remote key fob require CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
Inside of your keyless entry remote installed tiny coin cell battery. Delicately try to disassemble your keyless entry remote with hands or flat head screwdriver. Change one CR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Battery must be installed with the same position as was a previous. Your key will not work if you by mistake place battery wrong way.
After the new battery installed, check key fob functionality by pressing buttons. If everything is functioning, assemble your fob’s case in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and assemble it in place by hands from top to bottom. If your fob shell tightly closed, we done. If not, repeat the last step.
How to change the battery video instruction
How To Replace Lincoln Navigator Key Fob Battery 2004 2012
Still not working? Buy new one