2004 Mazda Tribute Key Fob Battery Replacement Guide

If your Mazda keyless entry remote isn't unlock doors properly, the cell battery more likely must to be replaced. In this post, you’ll benefit from knowing how to disassembly your remote key fob and change a weak battery yourself. If you decide to do it at home near Tribute, use this instruction, but don't forget to check everything you need before you start.
What size battery does 2004 Mazda Tribute key fob required
Prior to open remote key fob make sure that you have all recommended tools and materials: CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Tribute's key fob
Inside of your keyless entry remote installed small button cell battery. Carefully try to disassemble your fob with pry tools. Replace one CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside fob’s case. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you put battery wrong way.
Before assembling keyless entry fob's case, verify that everything working good by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and assemble it in place by hands from top to bottom. Check your key fob body for gaps. If it is not tightly closed try to repeat last step.
Video of key disassembly
How To Replace Mazda Tribute Key Fob Battery 2001 2006
Still not working? Buy new one