2004 Mitsubishi Diamante Key Fob Battery Replacement Guide

2004 Mitsubishi Diamante Key Fob Battery Replacement Guide

If your auto key fob isn't working well, the battery most likely must to be replaced. In this article, we explained how to open Mitsubishi key fob and replace a discharged battery DIY. If you decide to do it at home near Diamante, follow our guide, but don't forget to check all you need.

What type battery does 2004 Mitsubishi Diamante key fob required

Before starting disassembly keyless entry remote check all that you need: one CR2032 battery and flat head screwdriver.
  • 1xCR2032 battery
  • flat head screwdriver

Step by step guide

Inside of your keyless entry remote installed tiny button cell battery. Accurately try to open your key with flat head screwdriver. Replace CR2032 battery with flat head screwdriver.

Now it's time to install new battery inside keyless entry fob's case. Battery must be placed with the same position as was an old. Your key fob will not work if you by mistake place battery wrong way.

When the new battery installed, verify key fob by pressing buttons. If all functions works, assemble your fob’s body in reverse order.

The last thing to do is put your cover back on fob. Carefully try to assemble the two halves in place by hands from top to bottom. If your fob body firmly closed, we done. If not, repeat the last step.

How to change the battery video instruction

How To Replace Mitsubishi Diamante Key Fob Battery 1997 1998 1999

Still not working? Buy new one

Frequently Asked Questions

Key fob of Mitsubishi Diamante require 1xCR2032 batteries. Price for CR2032 batteries are under $4-6 build upon the size packaging, brand and type you buy. Take your old battery to the store, with you to find a proper replacement.

Often, after remote key fob battery change, you do not need to reprogram. Remote key fob reprogramming procedure often described in user's manual of your vehicle.

Changing your keyless entry remote battery is simple to do in 2004 Mitsubishi Diamante. Most of car manufacturers think about customers and make a special hole for key fob disassembly.

Auto repair shop's cost for change the battery in keyless entry remote is from 50 to 600 dollars depending on the make.

You should replace batteries inside keyless entry remote of Mitsubishi Diamante at least once in 4 years. The term of battery differ on frequency of use, quality and operating conditions.

If your Diamante key fob buttons not working, need multiple clicks to unlock or lock doors, signal strength reduced or fob's battery more than 4 years old, in most cases battery replace in key fob required. Installed battery is dead or weak with a high probability, but if it's not help to fix issues, keyless entry remote change or repair required.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: E4EG8D-522M-A
  2. Models: 1996-2004 Mitsubishi Diamante