How to Open Your 2004 Pontiac Grand Am Key Fob & Change Battery
Keyless entry remote allow easy access to your auto. If the remote key fob battery is discharged you’ll not to be able lock doors from distance. In this post, you will benefit from knowing how to open Pontiac remote key fob and replace a weak or dead battery DIY. If you decide to do it at home near Grand Am, follow our instruction, but first make sure you have tools and materials required.
What type battery does 2004 Pontiac Grand Am key fob takeBefore you start to disassembly keyless entry remote make sure that you have all recommended tools and materials: CR2032 battery and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to replace the battery in your Grand Am's remote key fob
Inside of your key fob installed coin battery. Gently try to pry apart your remote key fob with flat head screwdriver. Remove one CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside fob’s case. Battery must be installed with the same polarity as was an old. Your key fob will not work if you by mistake put battery wrong way.
Before assembling keyless entry fob's case, check that all working good by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your body pieces together and put it together by hands from top to bottom. Check your fob case for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2004 Pontiac Grand Am Video
How To Replace Pontiac Grand Am Key Fob Battery 2001 2002 2003 2004
Still not working? Buy new one