How to Open Your 2004 Subaru Baja Key Fob & Change Battery
If your Subaru remote key fob is not unlock doors well, the cell battery most likely must to be replaced. It's not difficult to change the battery in your keyless entry remote with our instruction. All tools, that you need is described in this article.
What type battery keyless entry remote require
Prior to disassembly remote key fob check all that you need: flat head screwdriver and 1xCR2025 battery.- 1xCR2025 battery
- flat head screwdriver
Step by step instruction
Inside of your key fob installed coin battery. Carefully try to pry apart your fob with hands or flat head screwdriver. Replace one CR2025 battery with flat head screwdriver.
Now it's time to install new battery in keyless entry fob's case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, verify keyless entry remote functionality by pressing buttons. If all functions works, assemble your keyless entry fob's body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body pieces together and assemble it together by hands from top to bottom. Inspect your key shell for gaps. If it is not firmly closed try to repeat last step.
How to change the battery video instruction
How To Replace Subaru Baja Key Fob Battery 2003 2004 2005 2006
Still not working? Buy new one