How to Open Your 2004 Suzuki Grand Vitara Key Fob and Change Battery
If your car keyless entry remote is no longer unlock doors correct, the cell battery most likely must to be changed. Below, we are going to tell you how to disassembly your keyless entry remote and replace a dead battery yourself. If you decide to do it at home near Grand Vitara, use this instruction, but first make sure you have everything you need before you start.
What type battery key fob usePrior to open remote key fob make sure that you have all recommended tools and materials: 1xCR2025 battery and flat head screwdriver.
- 1xCR2025 battery
- flat head screwdriver
Step by step guide
Inside of your keyless entry remote installed coin battery. Carefully try to disassemble your key fob with pry tools. Change CR2025 battery with flat head screwdriver.
Replace old battery with new one CR2025. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that everything is functioning by testing buttons on remote key fob.
At this point squeeze fob’s back cover together. Line your shell two halves together and assemble it together by hands from top to bottom. If your remote key fob shell tightly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
How To Replace Suzuki Grand Vitara Key Fob Battery 2004 2005 2006 2007 2008
Still not working? Buy new one