How to Replace the Battery in a 2004 Toyota Celica Key Fob
If your auto keyless entry remote is not unlock doors properly, the cell battery likely must to be replaced. Yes, it is possible to replace the battery in your keyless entry remote, and it’s easier than you think. Everything you need is outlined in this article.
What type battery does 2004 Toyota Celica remote key fob required
Before you start to open keyless entry remote be sure that you have all required tools and materials: phillips head screwdriver, flat head screwdriver and CR2025 battery.- phillips head screwdriver
- 1xCR2025 battery
- flat head screwdriver
Simple steps to change the battery in your car's remote key fob
A button cell battery installed inside the your keyless entry remote. Remove screw on the back of the key fob. Flip the keyless entry remote over and find for at least one fastener holding in the plastic.
Delicately try to disassemble your keyless entry remote with flat head screwdriver. Replace 1xCR2025 battery with flat head screwdriver.
Now it's time to install new battery inside fob’s body. Battery must be installed with the same polarity as was a previous. Your key fob will not work if you mistakenly put battery wrong way.
After the new battery installed, check keyless entry remote by pressing buttons. If all functions works, assemble your fob’s shell in reverse order.
The last thing to do is put your cover back on fob. Gently try to put the two halves in place by hands from top to bottom. If your key fob case tightly closed, we done. If not, repeat the last step. Screw the back of the key fob.
How to change the battery video instruction
How To Replace Toyota Celica Key Fob Battery 2001 2004
Still not working? Buy new one