How to Open Your 2005 Audi A6 Quattro Key Fob & Change Battery
If your Audi keyless entry remote is not unlock doors properly, the battery surely needs to be replaced. In this post, you will benefit from knowing how to disassembly Audi key fob and replace a dead or weak battery yourself. If you gonna solve to do it at home near A6 Quattro, use this guide, but first make sure you have all you need before you start.
What type battery does 2005 Audi A6 Quattro remote key fob take
Changing battery in keyless entry remote require flat head screwdriver and CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
Inside of your key fob installed small coin battery. Open key before you try to pry apart the remote key fob.
Carefully try to disassemble your keyless entry remote with hands or flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, verify keyless entry remote functionality by pressing buttons. If everything is functioning, assemble your fob’s case in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it together by hands from top to bottom. If your remote key fob body tightly closed, we done. If not, repeat the last step.
How to change the battery video guide
How to replace the battery in your Audi A6 key fob.
Still not working? Buy new one