2005 Buick Rendezvous Key Fob Battery Replacement Guide
Keyless entry remote allow easy access to your auto. When the key fob battery is weak or dead you lose your keyless entry fob's ability to use remote opportunities. Yes, it is possible to replace the battery in your keyless entry remote with our instruction. All tools, that you need is explained in this post.
What type battery key fob requireReplacing battery in remote key fob require 1 CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
- 1xCR2032 battery
- flat head screwdriver
Step by step guide
Inside of your key fob installed button cell battery. Carefully try to open your remote key fob with hands or flat head screwdriver. Change one CR2032 battery with flat head screwdriver.
Get new battery and install it inside fob’s body. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, verify that all functions works by testing buttons on keyless entry remote.
At this point squeeze fob’s back cover together. Line your body two halves together and assemble it in place by hands from top to bottom. Check your remote key fob case for gaps. If it is not firmly closed try to repeat last step.
How to replace the battery video instruction
How To Replace A 2002 - 2007 Buick Rendezvous Key Fob Battery