2005 Chevrolet Uplander Key Fob Battery Replacement Guide
Key fob allow access to your auto. When the remote key fob battery is dead you’ll lose your fob’s ability to use remote opening function. It's not complicated to change the battery in your remote key fob DIY. All tools, that you need is outlined below.
What type battery does 2005 Chevrolet Uplander keyless entry remote requiredReplacing battery in remote key fob require flat head screwdriver and 1xCR2032 battery. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.
- 1xCR2032 battery
- flat head screwdriver
Step by step guide
Inside of your key fob installed small coin battery. Delicately try to pry apart your keyless entry remote with flat head screwdriver. Replace CR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's body. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, make sure that all is functioning by pressing buttons on remote key fob.
The last thing to do is put your cover back on fob. Accurately try to put the pieces in place by hands from top to bottom. Check your keyless entry remote body for gaps. If it is not tightly closed try to repeat last step.
Video of keyless entry remote disassembly
How To Replace A 2005 - 2006 Chevrolet Uplander Key Fob Battery