2005 Chrysler PT Cruiser Key Fob Battery Replacement Instructions
Key fob grant access to your auto. When the key fob battery is dead you not to be able close trunk or doors remotely. Yes, it is possible to change the battery in your remote key fob by yourself. All tools, that you need is outlined in this article.
What type battery keyless entry remote useBefore going to disassembly keyless entry remote make sure that you have all required tools and materials: flat head screwdriver and 2 CR2016 batteries.
- 2xCR2016 batteries
- flat head screwdriver
Simple steps to replace the battery in your car's remote key fob
Inside of your remote key fob installed small coin battery. Gently try to open your key with flat head screwdriver. Remove 2 CR2016 batteries with flat head screwdriver.
Replace old batteries with fresh one CR2016. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
When the new batteries installed, check key fob functionality by pressing buttons. If everything working properly, assemble your keyless entry fob's shell in reverse order.
The last thing to do is put your cover back on fob. Accurately try to put the two halves in place by hands from top to bottom. If your remote key fob shell firmly closed, we done. If not, repeat the last step.
Video of keyless entry remote disassembly
Chrysler PT Cruiser Key Fob Battery Replacement (2001 - 2005)