How to Open Your 2005 Chrysler Sebring Key Fob and Change Battery

How to Open Your 2005 Chrysler Sebring Key Fob and Change Battery

If your car key fob is not unlock doors well, the battery more likely must to be changed. In this article, we outlined how to disassembly your keyless entry remote and change your Chrysler key battery step by step.

What type battery remote key fob use

Don't forget before open keyless entry remote be sure that you have all required tools and materials: flat head screwdriver and CR2016 batteries.
  • 2xCR2016 batteries
  • flat head screwdriver

Simple steps to change the battery in your Sebring's keyless entry remote

Inside of your remote key fob installed small button cell battery. Accurately try to pry apart your fob with flat head screwdriver. Remove 2 CR2016 batteries with flat head screwdriver.

Now it's time to install new batteries inside fob’s case. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you place battery wrong way.

Before assembling fob’s case, check that all working properly by pressing buttons on circuit board.

The last thing to do is put your cover back on fob. Accurately try to put the pieces together by hands from top to bottom. Inspect your keyless entry remote case for gaps. If it is not firmly closed try to repeat last step.

Key Fob Battery Replacement 2005 Chrysler Sebring Video

How To Replace Chrysler Sebring Key Fob Battery 2001 2002 2003 2004 2005 2006

Still not working? Buy new one


Key fob of Chrysler Sebring use 2xCR2016 batteries. Most CR2016 batteries are under $4 depending on the brand, type and size packaging you buy. You can take old battery to the store, to be sure.

Key fob in most of cases do not require to be reprogrammed after battery change. If your key fob not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Replacing your remote key fob battery is easy to do in 2005 Chrysler Sebring. Most of car manufacturers think about customers and make a special hole for remote key fob open.

Car service price for change the battery in remote key fob is from 50 to 600 dollars depending on the make.

You should change batteries inside key fob of Chrysler Sebring at least once in 4 years. lifespan of battery vary on frequency of use, quality and operating conditions. Lithium cells normally will last longer.

These signs will alert you that it's possible time to replace battery in your 2005 Chrysler Sebring: signal strength reduced, key fob buttons not working, low key battery indicator on dashboard and you didn't change battery more than 4 years.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: GQ43VT17T
  2. Models: 2001-2006 Chrysler Sebring