How to Open Your 2005 Ford Taurus Key Fob & Change Battery
Keyless entry remote grant easy access to your auto. If the keyless entry remote battery is dead you will not to be able close doors from distance. Below, we outlined how to open your car remote key fob and change your Ford key battery.
What type battery keyless entry remote usePrior to disassembly keyless entry remote check all that you need: 1 CR2032 battery and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
A tiny coin battery installed in the your keyless entry remote. Accurately try to pry apart your keyless entry remote with pry tools. Change 1 CR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's body. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, check remote key fob functionality by pressing buttons. If everything working properly, assemble your keyless entry fob's case in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it in place by hands from top to bottom. If your key body firmly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
DIY: Ford Keyless Remote Battery Replacement & Disassembly