2005 Pontiac Aztek Key Fob Battery Replacement Instructions
Remote key fob grant easy access to your Aztek. When the key fob battery is dead you lose your keyless entry fob's ability to control remote opportunities. It's not complicated to replace the battery in your remote key fob with our instruction. All you need is outlined in this post.
What type battery does 2005 Pontiac Aztek key fob requiredBefore starting disassembly keyless entry remote be sure that you have all recommended tools and materials: flat head screwdriver and 1 CR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
Inside of your remote key fob installed small coin battery. Gently try to disassemble your remote key fob with hands or flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
When the new battery installed, verify remote key fob by pressing buttons. If all functions works, assemble your keyless entry fob's case in reverse order.
The last thing to do is put your cover back on fob. Accurately try to put the two halves together by hands from top to bottom. Inspect your key shell for gaps. If it is not firmly closed try to repeat last step.
Video of remote key fob opening
How To Replace Pontiac Aztec Key Fob Battery 2002 2003 2004 2005