2006 Chrysler Pacifica Key Fob Battery Replacement Instructions

2006 Chrysler Pacifica Key Fob Battery Replacement Instructions

Key fob allow easy access to your Chrysler. Once the key battery is discharged you will lose your fob’s ability to use remote functions. In this article, we outlined how to open your car remote key fob and change your Chrysler key battery.

What type battery key fob use

Prior to open keyless entry remote make sure that you have all recommended tools and materials: one CR2032 battery and flat head screwdriver.
  • flat head screwdriver
  • 1xCR2032 battery

Step by step instruction

A tiny coin battery installed inside the your key fob. Gently try to disassemble your key fob with flat head screwdriver. Replace one CR2032 battery with flat head screwdriver.

Get new battery and install it inside fob’s case. Be sure to connect the battery the right way around in a circuit. Your keyless entry remote will not work if you place battery wrong way.

Before assembling fob’s case, check that all functions works by pressing buttons on circuit board.

At this point squeeze fob’s back cover together. Line your case two halves together and assemble it in place by hands from top to bottom. Inspect your fob body for gaps. If it is not tightly closed try to repeat last step.

Key Fob Battery Replacement 2006 Chrysler Pacifica Video

How To Replace A 2004 - 2008 Chrysler Pacifica Key Fob Remote Battery

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Chrysler Pacifica use 1xCR2032 batteries. Price for CR2032 batteries are under $4 depending on the size packaging, brand and type you buy. You can take old battery to the store, with you to find a proper replacement.

Often, after key battery change, you do not need to reprogram. Don't be scare of this procedure, because often it's described in user's manual.

Changing your keyless entry remote battery is simple to do in 2006 Chrysler Pacifica. Most of car manufacturers think of the customers and make a special hole for key fob disassembly.

The cost to change the battery inside fob can run anywhere from $30 to as high as $500 depending on the car and the service pricing.

You should replace batteries inside remote key fob of Chrysler Pacifica at least once in four years. The term of battery vary on frequency of use, quality and operating conditions. Lithium cells normally will last longer.

These symptoms will alert you that it's possible time to replace battery in your 2006 Chrysler Pacifica: low key battery indicator on dashboard, signal strength reduced, key fob buttons not working and multiple clicks to unlock or lock doors required.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: M3N65981772
  2. Models: 2004-2008 CHRYSLER Pacifica