How to Open Your 2006 Jeep Liberty Key Fob and Change Battery
Keyless entry remote allow access to your car. If the remote key fob battery is discharged you will lose your keyless entry fob's ability to control distance functions. It's not complicated to replace the battery in your key fob, and it’s easier than you think. All tools, that you need is described in this article.
What type battery does 2006 Jeep Liberty keyless entry remote takeBefore starting disassembly keyless entry remote check all that you need: flat head screwdriver and 1xCR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your Liberty's keyless entry remote
Inside of your remote key fob installed button cell battery. Gently try to pry apart your key with hands or flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.
Get new battery and install it inside fob’s case. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you put battery wrong way.
Before assembling keyless entry fob's case, check that everything is functioning by pressing buttons on circuit board.
The last thing to do is put your cover back on fob. Carefully try to assemble the two halves together by hands from top to bottom. If your keyless entry remote case tightly closed, we done. If not, repeat the last step.
How to replace the battery video guide
Jeep key fob battery replacememt
Still not working? Buy new one