2006 Mazda B4000 Key Fob Battery Replacement Instructions

2006 Mazda B4000 Key Fob Battery Replacement Instructions

If your B4000 key is not working correct, the cell battery likely needs to be replaced. It's not difficult to replace the battery in your remote key fob with our instruction. All tools, that you need is explained below.

What type battery keyless entry remote require

Before going to disassembly key fob check all that you need: flat head screwdriver and one CR2032 battery.
  • 1xCR2032 battery
  • flat head screwdriver

Simple steps to change the battery in your car's key fob

A coin battery installed inside the your remote key fob. Remove any internal key before you try to pry apart the key fob.

Delicately try to open your key with flat head screwdriver. Replace CR2032 battery with flat head screwdriver.

Replace old battery with new one CR2032. Be sure to connect the battery the right way around in a circuit. Your keyless entry remote will not work if you place battery wrong way.

Before assembling fob’s case, check that all working fine by pressing buttons on circuit board.

At this point squeeze keyless entry fob's back cover together. Line your body pieces together and assemble it in place by hands from top to bottom. If your fob body firmly closed, we done. If not, repeat the last step.

How to replace the battery video instruction

How To Replace Mazda B4000 Key Fob Battery 2000 2009

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Mazda B4000 use 1xCR2032 batteries. Price for CR2032 batteries are under $6 build upon the brand, size packaging and type you buy. You can take old battery to the store, with you to find a proper replacement.

Usually, after keyless entry remote battery change, reprogramming not required. Don't be scare of this procedure, because often it's described in user's manual.

Replacing your remote key fob battery is simple to do in 2006 Mazda B4000. Most of car manufacturers think about clients and make a special hole for remote key fob open.

The price to replace the battery in key fob is from $30 to as high as $500 depending on the make and the service station.

Remote key fob batteries in modern cars should be replaced every four years, but this will differ based on usage and battery quality. If your key fob reduced signal strength, you should replace batteries before it stop close doors and make trouble for you.

These symptoms will warning you that it's possible time to change battery in your Mazda B4000: signal strength reduced, multiple clicks to unlock or lock doors required, key fob buttons not working and you didn't change battery more than 4 years.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: OUCD6000022
  2. Models: 2001-2009 Mazda B4000