2006 Mazda MX-5 Miata Key Fob Battery Replacement Instructions
If your Mazda key fob is not open doors perfectly, the battery most likely must to be changed. Yes, it is possible to replace the battery in your remote key fob DIY. All tools, that you need is described below.
What kind of battery keyless entry remote require
Replacing battery in remote key fob require flat head screwdriver and one CR2025 battery. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.- 1xCR2025 battery
- flat head screwdriver
Simple steps to change the battery in your MX-5 Miata's remote key fob
A tiny coin cell battery installed in the your keyless entry remote. Remove any internal key first, and then try to pry apart the remote key fob.
Gently try to open your fob with pry tools. Change 1xCR2025 battery with flat head screwdriver.
Get new battery and install it in fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, make sure that all functions works by testing buttons on key fob.
The last thing to do is put your cover back on fob. Accurately try to put the pieces together by hands from top to bottom. Inspect your fob shell for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2006 Mazda MX-5 Miata Video
How To Replace A Mazda Miata MX-5 Key Fob Battery (2006-2013)
Still not working? Buy new one