2006 Mercedes-Benz CLK500 Key Fob Battery Replacement Guide
Remote key fob allow access to your auto. Once the key fob battery is dead or weak you’ll lose your keyless entry fob's ability to control remote functions. Yes, it is possible to change the battery in your key fob DIY. All you need is described in this post.
What type battery does 2006 Mercedes-Benz CLK500 remote key fob required
Prior to open key fob check all that you need: flat head screwdriver and two CR2025 batteries.- 2xCR2025 batteries
- flat head screwdriver
Simple steps to replace the battery in your car's keyless entry remote
Inside of your remote key fob installed button cell battery. Move the key out of the way if it is in the key fob.
Gently try to disassemble your keyless entry remote with flat head screwdriver. Remove CR2025 batteries with flat head screwdriver.
Get new batteries and install it inside fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new batteries installed, check keyless entry remote by pressing buttons. If everything working properly, assemble your keyless entry fob's body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it together by hands from top to bottom. If your keyless entry remote body firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2006 Mercedes-Benz CLK500 Video
SOLVED - Mercedes Benz Keyfob Battery Replacement | Smart Key Fob Dead Batteries
Still not working? Buy new one