2006 Mitsubishi Lancer Key Fob Battery Replacement Guide
If your auto key is no longer unlock doors perfectly, the battery probably must to be changed. Below, we walks you through how to open your keyless entry remote and replace your Mitsubishi key battery step by step.
What size battery does 2006 Mitsubishi Lancer keyless entry remote take
Before starting open key fob check all that you need: 1 CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Lancer's remote key fob
Inside of your remote key fob installed tiny coin battery. Accurately try to disassemble your remote key fob with pry tools. Remove 1xCR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, check that everything is functioning by pressing buttons on key fob.
The last thing to do is put your cover back on fob. Delicately try to put the two halves in place by hands from top to bottom. If your keyless entry remote case tightly closed, we done. If not, repeat the last step.
How to change the battery video instruction
DIY - Key Battery Mitsubishi Battery Change / Lance / Eclipse / Galant
Still not working? Buy new one