How to Replace the Battery in a 2006 Subaru Tribeca Key Fob

How to Replace the Battery in a 2006 Subaru Tribeca Key Fob

If your car key fob is no longer working perfectly, the cell battery most likely must to be changed. Yes, it is possible to change the battery in your key fob, and it’s easier than you think. All you need is outlined below.

What size battery does 2006 Subaru Tribeca remote key fob required

Before going to open remote key fob check all that you need: flat head screwdriver and one CR2025 battery.
  • flat head screwdriver
  • 1xCR2025 battery

Simple steps to change the battery in your car's key fob

A small coin battery installed inside the your remote key fob. Carefully try to disassemble your remote key fob with flat head screwdriver. Change one CR2025 battery with flat head screwdriver.

Replace old battery with new one CR2025. Be sure to connect the battery the right way around in a circuit. Your key will not work if you place battery wrong way.

When the new battery installed, verify key fob by pressing buttons. If all functions works, assemble your keyless entry fob's case in reverse order.

The last thing to do is put your cover back on fob. Carefully try to assemble the two halves in place by hands from top to bottom. If your remote key fob body tightly closed, we done. If not, repeat the last step.

Key Fob Battery Replacement 2006 Subaru Tribeca Video

How To Replace A Subaru Tribeca Key Fob Battery 2006 - 2008 Part No. CWTWBU745

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Subaru Tribeca require 1xCR2025 batteries. Most CR2025 batteries are under $5 build upon the size packaging, brand and type you buy. Take your old battery to the store, to find a proper replacement.

Usually, after remote key fob battery change, you do not need to reprogram. Don't be scare of this procedure, because often it's described in user's manual.

Yes, you can replace battery in your 2006 Subaru Tribeca key yourself. Most difficult part is to disassembly fob’s case. It's pretty simple with our step by step guide.

Car service pricing for change the battery in fob is $50-600 depending on the car.

You should replace batteries inside key fob of Subaru Tribeca at least once in three or four years. The term of battery differ on their amount of use, quality and operating conditions.

If your Subaru need multiple clicks to unlock or lock doors, fob's battery more than 4 years old, signal strength reduced or has low key battery indicator on dashboard, in most cases battery change in key fob needed. Currently installed battery is weak with a high probability, but if it's not fix, key replace or repair needed.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: NHVWB1U711
  2. Models: 2006-2007 Subaru Tribeca