How to Open Your 2006 Toyota Avalon Key Fob & Change Battery
Remote key fob grant access to your Avalon. When the key fob battery is dead or weak you will lose your keyless entry fob's ability to use remote functions. In this case, you will benefit from knowing how to disassembly Toyota keyless entry remote and change a weak battery yourself. If you choose to do it at home near Avalon, follow our instruction, but don't forget to check everything you need before you start.
What type battery remote key fob requirePrior to open remote key fob be sure that you have all recommended tools and materials: CR1632 battery, phillips head screwdriver and flat head screwdriver.
- phillips head screwdriver
- flat head screwdriver
- 1xCR1632 battery
Step by step guide
A small button battery installed in the your keyless entry remote. Remove fasteners on the back of the remote key fob. Flip the keyless entry remote over and find for at least one screw holding in the plastic.
Delicately try to open your keyless entry remote with flat head screwdriver. Replace one CR1632 battery with flat head screwdriver.
Get new battery and install it in fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new battery installed, check remote key fob by pressing buttons. If everything working fine, assemble your fob’s shell in reverse order.
The last thing to do is put your cover back on fob. Gently try to put the pieces together by hands from top to bottom. If your remote key fob shell firmly closed, we done. If not, repeat the last step. Screw the back of the key fob.
How to change the battery video guide
How To Change A Toyota Avalon Key Fob Battery 2005 - 2007 FCCID HYQ14AAF