2007 Audi TT Quattro Key Fob Battery Replacement Guide
If your car remote key fob is not open doors properly, the battery most likely must to be replaced. It's not difficult to replace the battery in your key fob DIY. Everything you need is described in this post.
What type battery key fob requireBefore going to disassembly key fob check all that you need: one CR2032 battery and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
A tiny coin cell battery installed inside the your remote key fob. Open key before you try to pry apart the key fob.
Accurately try to pry apart your key with flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Battery must be installed with the same position as was a previous. Your remote key fob will not work if you mistakenly place battery wrong way.
When the new battery installed, verify key fob functionality by pressing buttons. If all functions works, assemble your fob’s shell in reverse order.
The last thing to do is put your cover back on fob. Accurately try to put the two halves in place by hands from top to bottom. If your remote key fob case tightly closed, we done. If not, repeat the last step.
How to change the battery video instruction
How To Replace The Battery In Your Audi Key Fob
Still not working? Buy new one