How to Replace the Battery in a 2007 Buick Lucerne Key Fob
Keyless entry remote grant access to your car. When the remote key fob battery is weak or dead you not to be able unlock car from distance. In this post, you’ll benefit from knowing how to disassembly your car key fob and replace a dead battery DIY. If you decide to do it at home near Lucerne, use this guide, but first make sure you have everything you need.
What type battery does 2007 Buick Lucerne remote key fob take
Replacing battery in remote key fob require flat head screwdriver and 1 CR2032 battery. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Lucerne's key fob
Inside of your keyless entry remote installed coin cell battery. Carefully try to open your remote key fob with pry tools. Change one CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new battery installed, check keyless entry remote functionality by pressing buttons. If everything working good, assemble your fob’s body in reverse order.
The last thing to do is put your cover back on fob. Gently try to put the pieces in place by hands from top to bottom. If your key case tightly closed, we done. If not, repeat the last step.
Video of key fob opening
How To Replace A 2006 - 2011 Buick Lucerne Key Fob Battery
Still not working? Buy new one