How to Open Your 2007 Chevrolet Equinox Key Fob and Change Battery
If your Equinox remote key fob is no longer unlock doors correct, the battery most likely must to be changed. It's not difficult to replace the battery in your key fob by yourself. Everything you need is described in this article.
What size battery does 2007 Chevrolet Equinox remote key fob required
Before going to disassembly keyless entry remote be sure that you have all required tools and materials: 1 CR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Simple steps to replace the battery in your Equinox's keyless entry remote
A small coin cell battery installed inside the your key fob. Delicately try to pry apart your key with hands or flat head screwdriver. Remove 1xCR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you connect battery wrong way.
When the new battery installed, verify remote key fob functionality by pressing buttons. If everything working good, assemble your fob’s case in reverse order.
At this point squeeze fob’s back cover together. Line your shell pieces together and assemble it in place by hands from top to bottom. Inspect your remote key fob body for gaps. If it is not tightly closed try to repeat last step.
How to change the battery video instruction
How To Replace A Chevrolet Equinox Key Fob Battery 2007 - 2013 FCCID: OUC60270
Still not working? Buy new one