2007 Dodge Charger Key Fob Battery Replacement Instructions
Remote key fob grant easy access to your auto. If the remote key fob battery is weak you’ll not to be able unlock trunk or doors remotely. Below, we explained how to disassembly Dodge key fob and change a weak or dead battery DIY. If you gonna solve to do it at home near Charger, use this instruction, but first make sure you have tools and materials required before you start.
What kind of battery key fob useBefore starting disassembly remote key fob check all that you need: flat head screwdriver and 1 CR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Simple steps to replace the battery in your Charger's keyless entry remote
Inside of your key fob installed small button cell battery. Gently try to disassemble your remote key fob with hands or flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.
Now it's time to install new battery in keyless entry fob's shell. Battery must be placed with the same position as was an old. Your key will not work if you by mistake put battery wrong way.
After the new battery installed, verify remote key fob functionality by pressing buttons. If everything working properly, assemble your keyless entry fob's shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it together by hands from top to bottom. Check your keyless entry remote shell for gaps. If it is not firmly closed try to repeat last step.
How to replace the battery video guide
How To Replace A 2006 - 2007 Dodge Charger Key Fob Battery
Still not working? Buy new one