How to Replace the Battery in a 2007 Dodge Magnum Key Fob
If your Dodge key fob isn't working perfectly, the battery more likely must to be changed. It's not difficult to change the battery in your keyless entry remote with our guide. All tools, that you need is described in this article.
What type battery does 2007 Dodge Magnum remote key fob take
Replacing battery in remote key fob require flat head screwdriver and CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
A small coin cell battery installed in the your remote key fob. Accurately try to open your keyless entry remote with pry tools. Remove CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, check remote key fob by pressing buttons. If all functions works, assemble your keyless entry fob's case in reverse order.
At this point squeeze fob’s back cover together. Line your case pieces together and assemble it in place by hands from top to bottom. If your key shell tightly closed, we done. If not, repeat the last step.
Video of remote key fob opening
How To Replace Dodge Magnum Key Fob Battery 2006 2007
Still not working? Buy new one