How to Open Your 2007 Ford Crown Victoria Key Fob and Change Battery
Key fob grant easy access to your Ford. When the key fob battery is discharged you will lose your keyless entry fob's ability to use remote opening function. In this article, we outlined how to open your key fob and change your Ford key battery step by step.
What kind of battery keyless entry remote use
Replacing battery in keyless entry remote require flat head screwdriver and CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
A coin cell battery installed inside the your keyless entry remote. Gently try to disassemble your fob with pry tools. Replace 1xCR2032 battery with flat head screwdriver.
Now it's time to install new battery inside keyless entry fob's case. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new battery installed, check keyless entry remote functionality by pressing buttons. If all functions works, assemble your fob’s body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it in place by hands from top to bottom. If your fob shell firmly closed, we done. If not, repeat the last step.
Video of key disassembly
you How To Replace Ford Crown Victoria Key Fob Battery 2007 2008 2009 2010
Still not working? Buy new one