How to Replace the Battery in a 2007 Ford Edge Key Fob
Remote key fob grant access to your car. If the keyless entry remote battery is discharged you lose your keyless entry fob's ability to use distance functions. It's not complicated to replace the battery in your keyless entry remote with our step by step instruction. Everything you need is explained below.
What size battery does 2007 Ford Edge key fob take
Replacing battery in key fob require flat head screwdriver and one CR2032 battery. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your car's keyless entry remote
A small coin battery installed inside the your keyless entry remote. Delicately try to disassemble your remote key fob with pry tools. Remove 1 CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, verify that all functions works by pressing buttons on remote key fob.
The last thing to do is put your cover back on fob. Delicately try to put the two halves in place by hands from top to bottom. Check your key case for gaps. If it is not tightly closed try to repeat last step.
How to change the battery video instruction
Ford Edge Remote Key Fob Battery Replacement 2007 - 2015
Still not working? Buy new one