Replace Key Fob Batteries

How to Replace the Battery in a 2007 Isuzu Ascender Key Fob

How to Replace the Battery in a 2007 Isuzu Ascender Key Fob

If your car keyless entry remote is no longer working well, the battery surely must to be replaced. Below, you will benefit from knowing how to open Isuzu remote key fob and change a discharged battery yourself. If you decide to do it at home near Ascender, use this instruction, but first make sure you have tools and materials required.

What type battery keyless entry remote use

Changing battery in keyless entry remote require 1 CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
  • 1xCR2032 battery
  • flat head screwdriver

Step by step guide

Inside of your keyless entry remote installed small coin battery. Carefully try to disassemble your key fob with hands or flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.

Replace old battery with fresh one CR2032. Battery must be placed with the same position as was a previous. Your key will not work if you by mistake place battery wrong way.

Before assembling fob’s case, check that all functions works by testing buttons on circuit board.

At this point squeeze fob’s back cover together. Line your case pieces together and put it together by hands from top to bottom. Check your key fob shell for gaps. If it is not tightly closed try to repeat last step.

Key Fob Battery Replacement 2007 Isuzu Ascender Video

How To Replace Isuzu Ascender Key Fob Battery 2003 2008

Still not working? Buy new one

FAQ

Key fob of Isuzu Ascender require 1xCR2032 batteries. Price for CR2032 batteries are under $4 depending on the brand, type and size packaging you buy. You can take old battery to the store, with you to find a proper replacement.

Keyless entry remote in most of cases do not require to be reprogrammed after battery replace. If your key fob not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Yes, you can change battery in your 2007 Isuzu Ascender key yourself. Most hard part is to open keyless entry fob's case. It's pretty easy with our guide.

Auto repair shop's price for change the battery in key fob is from 50 to 600 dollars depending on the make.

Key fob batteries in Isuzu Ascender should be replaced every three or four years, although this will differ based on their amount of use and quality. If your key fob reduced signal strength, you should change batteries before it stop close doors and make problems for you.

These symptoms will alert you that it's perhaps time to replace battery in your Isuzu Ascender: key fob buttons not working, you didn't change battery more than 4 years, low key battery indicator on dashboard and signal strength reduced.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Isuzu Models:

Fob Compatibility:

  1. FCC ID: MYT3X6898B
  2. Models: 2003-2008 Isuzu Ascender