How to Replace the Battery in a 2007 Isuzu i-370 Key Fob

If your car keyless entry remote isn't unlock doors properly, the cell battery likely needs to be replaced. Below, we explained how to disassembly your car keyless entry remote and change your Isuzu key battery step by step.
What type battery keyless entry remote use
Before starting disassembly key fob make sure that you have all required tools and materials: 1 CR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your car's key fob
Inside of your key fob installed small coin cell battery. Gently try to disassemble your keyless entry remote with hands or flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Battery must be placed with the same polarity as was an old. Your remote key fob will not work if you by mistake put battery wrong way.
Before assembling keyless entry fob's case, make sure that all functions works by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and assemble it in place by hands from top to bottom. If your remote key fob shell tightly closed, we done. If not, repeat the last step.
Video of key opening
How To Replace Isuzu i 370 Key Fob Battery 2007 2008