2007 Jaguar S-Type Key Fob Battery Replacement Instructions

If your S-Type remote key fob is not open doors properly, the battery probably needs to be changed. It's not complicated to replace the battery in your key fob, and it’s easier than you think. Everything you need is described in this article.
What type battery keyless entry remote use
Before beginning disassembly keyless entry remote make sure that you have all recommended tools and materials: flat head screwdriver and CR2032 battery.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
Inside of your remote key fob installed tiny coin battery. Open key before you try to pry apart the keyless entry remote.
Delicately try to open your remote key fob with hands or flat head screwdriver. Remove one CR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Battery must be installed with the same position as was a previous. Your key fob will not work if you by mistake put battery wrong way.
Before assembling keyless entry fob's case, check that all functions works by pressing buttons on circuit board.
The last thing to do is put your cover back on fob. Gently try to assemble the pieces together by hands from top to bottom. Inspect your keyless entry remote shell for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2007 Jaguar S-Type Video
Jaguar X-Type S-Type Key Fob Battery Replacement - DIY
Still not working? Buy new one