How to Open Your 2007 Land Rover Range Rover Sport Key Fob & Change Battery
Remote key fob grant access to your car. If the keyless entry remote battery is discharged you’ll not to be able close car from distance. It's not difficult to change the battery in your key fob with our instruction. All tools, that you need is explained in this article.
What kind of battery key fob useReplacing battery in remote key fob require flux, soldering iron, flat head screwdriver, soldering wire and 1xVL2330 battery. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
- 1xVL2330 battery
- flat head screwdriver
- soldering wire
- soldering iron
Simple steps to change the battery in your car's remote key fob
Inside of your keyless entry remote installed button cell battery. Open key before you try to pry apart the keyless entry remote.
Gently try to disassemble your key with pry tools. VL2330 is rechargeable battery. To remove it from a remote key fob soldering iron required.
Change old battery with fresh one VL2330. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, check remote key fob by pressing buttons. If everything is functioning, assemble your fob’s body in reverse order.
The last thing to do is put your cover back on fob. Carefully try to assemble the two halves together by hands from top to bottom. Inspect your key case for gaps. If it is not firmly closed try to repeat last step.
How to replace the battery video guide
Replacing the Range Rover L322 Key Fob & Battery