How to Open Your 2007 Mitsubishi Raider Key Fob and Change Battery

How to Open Your 2007 Mitsubishi Raider Key Fob and Change Battery

Remote key fob allow easy access to your car. Once the key fob battery is dead you will not to be able open trunk or doors from distance. Below, you will benefit from knowing how to open Mitsubishi keyless entry remote and replace a weak or dead battery yourself. If you decide to do it at home near Raider, use this guide, but first make sure you have everything you need.

What size battery does 2007 Mitsubishi Raider key fob take

Replacing battery in key fob require one CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
  • flat head screwdriver
  • 1xCR2032 battery

Step by step guide

Inside of your keyless entry remote installed tiny button cell battery. Carefully try to open your keyless entry remote with flat head screwdriver. Change one CR2032 battery with flat head screwdriver.

Now it's time to install new battery inside fob’s shell. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you place battery wrong way.

When the new battery installed, check remote key fob by pressing buttons. If everything working properly, assemble your fob’s case in reverse order.

At this point squeeze fob’s back cover together. Line your shell pieces together and assemble it together by hands from top to bottom. Check your key fob shell for gaps. If it is not firmly closed try to repeat last step.

Video of key opening

How To Replace Mitsubishi Raider Key Fob Battery 2006 2007 2008 2009

Still not working? Buy new one


Key fob of Mitsubishi Raider require 1xCR2032 batteries. Price for CR2032 batteries are under $6 build upon the size packaging, brand and type you buy. You can take old battery to the store, to find a proper replacement.

Keyless entry remote in most of cases do not require to be reprogrammed after battery replace. If your key not working, recheck new battery voltage. Otherwise, read user's manual or contact local dealer.

Yes, you can replace battery in your 2007 Mitsubishi Raider remote key fob yourself. Most difficult part is to disassembly fob’s case. It's pretty easy with our guide.

The cost to replace the battery inside keyless entry remote is in range $50-600 depending on the car and the service station.

Remote key fob batteries in Mitsubishi Raider should be changed every 4 years, but this will differ based on frequency of use and quality. If your remote key fob reduced signal strength, you should change batteries before it stop close doors and make trouble for you.

If your Mitsubishi has low key battery indicator on dashboard, signal strength reduced, need multiple clicks to unlock or lock doors or key fob buttons not working, it's probably battery replace in keyless entry remote required. Currently installed battery is weak with a high probability, but if it's not fix problem, keyless entry remote change or repair needed.
Be the first to comment.
Your message is required.

Fob Compatibility:

  2. Models: 2006-2009 Mitsubishi Raider