How to Replace the Battery in a 2007 Toyota FJ Cruiser Key Fob
Keyless entry remote grant easy access to your FJ Cruiser. Once the key fob battery is weak or dead you will lose your keyless entry fob's ability to use distance functions. It's not difficult to replace the battery in your keyless entry remote with our instruction. All you need is outlined in this post.
What type battery does 2007 Toyota FJ Cruiser remote key fob takeBefore you start to disassembly keyless entry remote check all that you need: flat head screwdriver, one CR2016 battery and phillips head screwdriver.
- phillips head screwdriver
- 1xCR2016 battery
- flat head screwdriver
Simple steps to replace the battery in your car's key fob
Inside of your keyless entry remote installed button battery. Unscrew the back of the remote key fob. Spin the keyless entry remote over and look for at least 1 fastener holding in the plastic.
Gently try to disassemble your key with flat head screwdriver. Replace 1xCR2016 battery with flat head screwdriver.
Replace old battery with fresh one CR2016. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that everything is functioning by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Carefully try to put the pieces together by hands from top to bottom. Inspect your keyless entry remote body for gaps. If it is not firmly closed try to repeat last step. Screw fastener in the back of the keyless entry remote.
Key Fob Battery Replacement 2007 Toyota FJ Cruiser Video
How To Change The Key Fob Battery For A Toyota FJ Cruiser (2007-2008)