How to Open Your 2008 Chevrolet Tahoe Key Fob and Change Battery
If your Chevrolet key is not open doors perfectly, the cell battery likely needs to be changed. In this article, we explained how to open your car key fob and change your Chevrolet key battery.
What kind of battery remote key fob useReplacing battery in key fob require CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.
- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
A button battery installed inside the your key fob. Accurately try to disassemble your key fob with pry tools. Remove CR2032 battery with flat head screwdriver.
Now it's time to install new battery in fob’s body. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, check that everything is functioning by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and put it in place by hands from top to bottom. Inspect your remote key fob body for gaps. If it is not firmly closed try to repeat last step.
How to replace the battery video instruction
How To Replace Chevrolet Tahoe Key Fob Battery 2007 2008 2009 2010 2011 2012 2013 2014