2008 Chrysler 300 Key Fob Battery Replacement Instructions

2008 Chrysler 300 Key Fob Battery Replacement Instructions

If your car keyless entry remote isn't open doors properly, the battery surely must to be changed. Below, we are going to tell you how to disassembly your car keyless entry remote and replace a weak or dead battery yourself. If you choose to do it at home near 300, use this instruction, but don't forget to check tools and materials required before you start.

What is the battery key fob use

Before going to open key fob check all that you need: flat head screwdriver and 1xCR2032 battery.
  • 1xCR2032 battery
  • flat head screwdriver

Step by step instruction

A tiny coin battery installed in the your key fob. Accurately try to disassemble your remote key fob with flat head screwdriver. Remove 1xCR2032 battery with flat head screwdriver.

Change old battery with fresh one CR2032. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you place battery wrong way.

Before assembling keyless entry fob's case, make sure that all functions works by pressing buttons on remote key fob.

The last thing to do is put your cover back on fob. Delicately try to put the pieces in place by hands from top to bottom. If your keyless entry remote case tightly closed, we done. If not, repeat the last step.

Key Fob Battery Replacement 2008 Chrysler 300 Video

How To Change Key Fob Battery Chrysler Battery Remote Replacement

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Chrysler 300 require 1xCR2032 batteries. Most CR2032 batteries are under $6 depending on the brand, type and size packaging you buy. You can take old battery to the store, to find a proper replacement.

Remote key fob in most of cases do not require to be reprogrammed after battery change. If your remote key fob not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Yes, you can change battery in your 2008 Chrysler 300 key yourself. Most difficult part is to open keyless entry fob's case. It's pretty simple with our step by step guide.

Car service cost for change the battery in key fob is from 50 to 600 dollars depending on the car.

Remote key fob batteries in Chrysler 300 should be changed every 3-4 years, although this will vary based on frequency of use and battery quality. If your keyless entry remote decreased signal strength, you should replace batteries before it stop close doors and make problems for you.

These signs will warning you that it's possible time to replace battery in your 2008 Chrysler 300: key fob buttons not working, low key battery indicator on dashboard, multiple clicks to unlock or lock doors required and you didn't change battery more than 4 years.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: IYZ-C01C
  2. Models: 2008-2010 Chrysler 300