Replace Key Fob Batteries

How to Open Your 2008 Chrysler Aspen Key Fob & Change Battery

How to Open Your 2008 Chrysler Aspen Key Fob & Change Battery

Key fob grant easy access to your Aspen. If the key battery is weak you will lose your fob’s ability to use remote opportunities. Below, we demonstrate how to disassembly Chrysler keyless entry remote and replace a weak battery yourself. If you decide to do it at home near Aspen, use this instruction, but don't forget to check everything you need.

What type battery remote key fob require

Replacing battery in remote key fob require one CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
  • flat head screwdriver
  • 1xCR2032 battery

Step by step instruction

Inside of your keyless entry remote installed coin cell battery. Accurately try to open your keyless entry remote with hands or flat head screwdriver. Replace CR2032 battery with flat head screwdriver.

Now it's time to install new battery inside fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.

After the new battery installed, verify remote key fob functionality by pressing buttons. If everything working good, assemble your fob’s case in reverse order.

The last thing to do is put your cover back on fob. Delicately try to assemble the pieces in place by hands from top to bottom. Inspect your key case for gaps. If it is not tightly closed try to repeat last step.

How to replace the battery video instruction

How To Replace Chrysler Aspen Key Fob Battery 2007 2008 2009

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Chrysler Aspen require 1xCR2032 batteries. Most CR2032 batteries are under $6 build upon the size packaging, brand and type you buy. Take your old battery to the store, to find a proper replacement.

Key fob in most of cases do not require to be reprogrammed after battery change. If your keyless entry remote not working, recheck new battery voltage. Otherwise, read user's manual or contact local dealer.

Changing your keyless entry remote battery is easy to do in 2008 Chrysler Aspen. Most of car manufacturers think about customers and make a special hole for remote key fob open.

The price to change the battery in keyless entry remote can run anywhere $50-600 depending on the brand and the service station.

Keyless entry remote batteries in Chrysler Aspen should be changed once in four years, but this will vary based on frequency of use and quality. If your remote key fob decreased signal strength, you should change batteries before it stop open doors and make trouble for you.

These signs will alert you that it's possible time to change battery in your Chrysler Aspen: low key battery indicator on dashboard, you didn't change battery more than 4 years, key fob buttons not working and signal strength reduced.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Chrysler Models:

Fob Compatibility:

  1. FCC ID: OHT692427AA
  2. Models: 2007-2009 Chrysler Aspen